Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
AfterGate Repair in Sylmar, CA
Gate access control in Sylmar means something different than it does ten miles south. The equestrian properties north of Foothill Boulevard run wide double-swing and sliding gates built for horse trailer clearance, and the Santa Ana winds that funnel through the Newhall Pass hit that hardware harder than anything a standard residential system was rated for. When a keypad stops reading or an opener strips its gear, the fix usually involves more than swapping a part. Call (747) 260-0589 and we’ll send a technician who documents everything before, during, and after.
Why Sylmar Homes Are Different
Two things shape gate work in Sylmar more than anything else. First, the housing stock. The ranch-style tracts from the 1950s through 1970s sit on flat lots with standard driveway gates, but the equestrian parcels north of Foothill are a different animal entirely: wide driveways, perimeter block walls, and heavy tubular-steel or wrought-iron gates sized for trailers. Posts on those properties are often set in footings poured decades ago, and many predate or survived the 1971 Sylmar earthquake, which was centered here. A post that cracked or heaved then has had fifty-plus years to drift, and the gate that keeps binding or racking usually traces back to it. Second, the wind. Sylmar sits at the mouth of the Newhall Pass, and Santa Ana events accelerate through that gap and into the northern Valley, bending frames, stripping operators, and shearing hinges. Summer heat above 105°F expands steel frames enough to throw automatic gates out of travel limits and trigger false obstruction faults. Hardware here cycles through wear faster than in neighborhoods just a few miles south.
Our Main Sylmar Services
Three calls dominate our schedule in Sylmar: gates that stopped moving, gates that never existed and need to, and motors that gave up. Each has its own dedicated page because each involves different scoping, different parts, and different lead times.
Gate Repair in Sylmar
When a Sylmar gate fails, the cause is rarely mysterious. On ranch properties it’s usually wind fatigue or a shifted post; on tract homes it’s more often a worn hinge or a limit switch that drifted. We diagnose the root cause, write the price, and fix it. That service is covered in full on our Gate Repair in Sylmar page.
Gate Installation in Sylmar
New gates in Sylmar need to match what they’re protecting. A standard pedestrian gate won’t survive on an equestrian lot, and a cantilever slider on a tight tract-home driveway is overkill. We scope the gate to the property, not the other way around. Details are on our Gate Installation in Sylmar page.
Gate Motor & Opener in Sylmar
The wind load at the mouth of the Newhall Pass kills operators faster than any other factor in Sylmar. We replace motors, arms, control boards, and travel limits, and we stock parts for nine brands so we’re not pushing a new motor when a rebuild is the right call. See our Gate Motor & Opener in Sylmar page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Sylmar
Access control on a Sylmar equestrian property has to survive dust, direct sun, and Santa Ana wind loads, while still answering reliably from the driver’s seat of a truck pulling a trailer. The systems we install and repair here - keypads, remotes, phone entry, card readers, and video intercoms - are commercial-grade hardware, because the residential stuff fails fast in this environment. When we work on one, we leave a documented photo record and a written scope under The Haven Standard, so the next service call doesn’t start from zero. Our full service detail is on the Gate Access Control page.
Keypad Entry
Signs you need it
The keypad reads some codes but not others, or works only after several presses.
What it costs in Sylmar
Keypad and receiver service typically runs $145-$340 depending on whether we’re replacing the keypad or just the receiver board.
How we do it
We check voltage at the keypad, verify the receiver is pairing, replace the failing component, and test every user code before we leave.
Remote Control
Signs you need it
One remote works, another doesn’t, or the gate opens only from the wall button.
What it costs in Sylmar
Adding or reprogramming remotes runs $125-$285.
How we do it
We identify the receiver frequency, clear and reprogram remotes in sequence, and confirm range from the street and the driveway approach.
Phone Entry
Signs you need it
The call goes through but the gate won’t open, or the unit drops calls after the first ring.
What it costs in Sylmar
Phone entry repair runs $225-$495 depending on whether it’s a relay issue or a full unit replacement.
How we do it
We test the phone line at the unit, check the relay output, and replace either the relay board or the entire entry unit based on what fails.
Video Intercom
Signs you need it
The screen is blank, audio works but video doesn’t, or the door release button does nothing.
What it costs in Sylmar
Video intercom service typically runs $285-$720 depending on whether it’s a monitor replacement or a full system swap.
How we do it
We check power at the monitor and the outdoor station, test video signal continuity, and replace the failed component with a compatible unit.
What Gate Access Control Costs in Sylmar
| Item | Typical range in Sylmar |
|---|---|
| Remote add or reprogram | $125-$285 |
| Keypad service | $145-$340 |
| Phone entry repair | $225-$495 |
Can you add a remote while you’re already here for another repair?
Yes. We carry remote stock for Ghost Controls, DoorKing, and Elite on the truck, so if you mention it when you call, we’ll have the right remote ready. Programming takes about ten minutes and the cost is added to the written scope.
Does the wind affect keypads and intercoms in Sylmar?
It does. Dust and wind-driven grit get into keypad membranes and degrade the contact points faster than in sheltered neighborhoods. We use weather-sealed keypads rated for direct outdoor exposure on Sylmar jobs, not indoor-grade units.
Gate Parts & Welding in Sylmar
On Sylmar’s horse properties, gate posts set in cracked 1971-era footings and hinges sheared by Newhall Pass wind are the two parts failures we see constantly. A gate that keeps drifting out of square usually has a leaning or split post at the root, not a hinge problem, and welding a hinge back onto a post that’s still moving buys you one season at best. We weld on site, replace posts properly, and leave a photographed record of every part installed. Details are on our Gate Parts & Welding page.
Hinge Replacement
Signs you need it
The gate scrapes the ground on the latch side or drops visibly when open.
What it costs in Sylmar
Hinge replacement runs $165-$420 depending on gate weight and whether the post is sound.
How we do it
We support the gate, cut or unbolt the old hinges, weld or mount new ones, and set the gate to clear the ground evenly.
Post Replacement
Signs you need it
The post leans, the gate binds at the latch, or you can see a crack running through the footing.
What it costs in Sylmar
Post replacement runs $425-$950 depending on depth, footing condition, and gate weight.
How we do it
We excavate the old footing, set a new post in concrete at the correct depth, weld or bolt the gate, and photograph the new footing before backfill.
Gate Rollers
Signs you need it
The gate shudders or squeals when it slides, or the track shows flat spots.
What it costs in Sylmar
Roller replacement runs $145-$340 depending on roller size and how many need changing.
How we do it
We lift the gate, pull the old rollers, inspect the track for wear, install new rollers, and test the gate through its full travel.
What Gate Parts & Welding Costs in Sylmar
| Item | Typical range in Sylmar |
|---|---|
| Hinge replacement | $165-$420 |
| Post replacement | $425-$950 |
| Roller replacement | $145-$340 |
Do you weld on site or take the gate to a shop?
We weld on site. Mobile welding lets us set the gate in place, tack it, check swing and clearance, and finish weld while it’s mounted. That prevents the slight distortion that happens when a gate is welded flat on a shop floor.
Can you save a post that’s leaning?
Sometimes, if the post itself is sound and only the footing has cracked, we can reset and re-pour around it. If the post is bent or the base is rotted through, replacement is the fix. We show you photos of what we found before you approve either path.
Brands We Service in Sylmar
We work on whatever is already on the property, including Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock common parts for each on the truck. Most access control and opener repairs in Sylmar are completed the same visit. See our brands for the full list.
Pricing for Gate Repair in Sylmar, CA
| Service | Typical range in Sylmar |
|---|---|
| Remote add or reprogram | $125-$285 |
| Keypad service | $145-$340 |
| Phone entry repair | $225-$495 |
| Video intercom service | $285-$720 |
| Hinge replacement | $165-$420 |
| Post replacement | $425-$950 |
| Roller replacement | $145-$340 |
Wind-driven wear and post shifts from older footings push Sylmar prices toward the upper end of these ranges when hidden damage surfaces. Every job gets a written price before any work starts, and nothing gets added to the invoice that wasn’t on the scope you approved.
Neighborhoods We Serve in Sylmar
We work across all of Sylmar, from the ranch spreads north of Foothill Boulevard to the tract neighborhoods south of the 210. Typical response time for the area is same-day on emergencies and next-day for scheduled work.
- Rancho Cascades
- Lake View Terrace
- North Sylmar
- Mission Wells
Service Area - Cities Near Sylmar
We handle gate work throughout the northeast Valley. Beyond Sylmar, we regularly serve San Fernando, CA, Granada Hills, CA, Panorama City, CA, and Sun Valley, CA. Scheduling is coordinated from our Los Angeles office, with local crews dispatched to Sylmar daily.
Serving Sylmar, CA - Our Local Coverage Area
We’re based in the Sylmar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sylmar
On emergencies we dispatch same-day throughout Sylmar, usually within two to four hours depending on where you are and what time you call. A live person answers our phone 24 hours a day, so you’ll never wait through a voicemail loop. Call (747) 260-0589 and you’ll get a name and a dispatch window.
Most gate repairs and part replacements don’t require a permit. Full installations or automated systems with new electrical runs may, depending on scope and location. We’ll tell you what applies to your property during the estimate, and we handle the paperwork when it does.
That’s how every job works. Under Clause 1 of The Haven Standard, you get a written scope and a written price before any work begins. Nothing gets added to the invoice that wasn’t approved in writing. Call (747) 260-0589 for a free estimate, and we’ll put it on paper.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sylmar Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.