Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
AfterFast, Reliable Gate Installation Across San Fernando
Gate installation in San Fernando runs from about $1,400 for a basic pedestrian gate to $11,000+ for a fully automated double driveway security gate with new posts, operator, and safety equipment. We schedule most first visits within 2-3 business days and always hand you a written price before any work begins. If you’re on a tight shared driveway off Maclay Avenue or a corner lot near San Fernando Road, call (747) 260-0589 and we’ll measure what’s actually there. Our crews work in San Fernando weekly, so we know what these post-WWII lots actually require.
We’re Gate Installation specialists, and that’s the whole job. Not a handyman add-on.
Why Vance Gate Repair San Fernando Is San Fernando’s Preferred Gate Installation Company
San Fernando’s housing stock was mostly built in the 1940s through 1960s, and a lot of the original gate hardware is still in place. That means hinge posts that have been sitting in sandy alluvial soil for 70 years, steel that’s been through decades of 105° summers, and driveway layouts that were never designed for the gate widths people want today. Adrian Vance started this company in 2014 doing commercial access-control documentation, and that habit carried over: every residential gate we install in San Fernando gets a written scope, a written price, and a photo record of the finished work before we leave.
San Fernando homeowners call us because the price is on paper before we pick up a tool. That’s Haven Standard Clause 1. No verbal estimate, no end-of-job invoice surprise. You get the flat price, you sign it, we do the work. The 365-Day Done Right Promise covers every installation for a full year: if something isn’t right within 365 days, we fix it at no charge. No argument, no fee.
Dispatch is coordinated from our Los Angeles office, and our crews serve San Fernando locally, often the same week you call. A live person answers 24/7, so when you call (747) 260-0589 at 9 p.m. because a gate off-brand motor failed, you talk to a human who can schedule you, not a voicemail loop.
Our Gate Installation Services in San Fernando
Swing Gate Installation
Swing gates are the most common installation we do in San Fernando, and also the one most likely to fail if the post work is skipped. Many original 1950s hinge posts are leaning 3-6 degrees out of plumb from decades of seismic micro-activity and wet-season soil saturation. We check post plumb with a level before quoting any swing gate, and if the footing can’t hold, we pour new concrete below grade before hanging the panel. A properly set post in San Fernando soil needs more embedment than a coastal LA post does, and we size for it. Typical swing gate installation here runs $2,200-$5,800 for a single driveway gate with new posts and hardware, before automation.
Sliding Gate Installation
Narrow San Fernando driveways that run alongside a house often can’t fit a swing gate’s arc without hitting a car or a wall. That’s where sliding gates earn their place. We install track-style and cantilever sliders on lots near San Fernando Road and throughout the numbered streets, where a swing panel would block the sidewalk or the neighbor’s access. On these jobs, we check the concrete pad for post-1971 heave before setting the track; uneven pads cause rack-and-pinion misalignment within months. Sliding gate installation typically runs $2,800-$7,200 depending on width, weight, and whether the pad needs resurfacing.
Pedestrian Gate Installation
Pedestrian gates are small but they take real abuse. They’re the gate that gets used 15 times a day, often by kids, and they’re usually the original 1960s unit with corroded hinges. We install powder-coated steel or wrought-iron pedestrian gates through San Fernando’s residential blocks, set them to self-close where short lots put the gate right at the sidewalk, and match the existing fence line where possible. A new pedestrian gate in San Fernando, including hinges and a latch, usually runs $1,400-$2,900.
Security Gate Installation
Security gates in San Fernando sit at the front of the house on tight lots, often the first layer of defense and the first thing a delivery driver touches. We install double driveway security gates with automatic operators, keypad entry, and UL 325-compliant entrapment protection (photo-eyes or edge sensors). On shared driveways, we coordinate the property line and the neighbor’s side before ever setting a post. A full automated double security gate in San Fernando typically runs $7,000-$11,500 all in, including posts, operator, keypad, and safety sensors.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in San Fernando
We install and service operators from FAAC, BFT, Linear, Viking, and more. If a San Fernando homeowner already has a Mighty Mule or a DoorKing, we work with it; we don’t steer you to a replacement when the motor is fine. What matters more than the brand on the label is that the operator gets sized for the gate’s actual weight and San Fernando’s heat, because an undersized motor on a heavy iron gate here fails the same summer it’s installed. We stock common parts locally for San Fernando jobs, so most repairs don’t wait on a mail-order shipment.
Common Gate Installation Problems We See in San Fernando Homes
- Hinge posts out of plumb. The defining San Fernando problem. Post-1971 soil movement and wet-season saturation have tilted thousands of original posts a few degrees. We level-test every existing post before quoting; hanging a new gate on a leaning post means a scraping gate and a callback.
- Sliding gates on uneven concrete pads. Pads poured decades ago have shifted with ground heave. A rack-and-pinion slide gate needs a level, true track, or it grinds. We check the pad with a straightedge and quote resurfacing when it’s off.
- No entrapment protection on older automatic gates. UL 325 requires photo-eyes or edge sensors on automatic gates, and we see older San Fernando installs without them, especially on shared driveways where kids and dogs are common. We install the safety equipment and photograph it in the final record.
- Thermal expansion in summer. San Fernando’s 105-110°F summer days expand steel frames enough to throw chains and rollers out of calibration. Gate panels that work in January can bind in August. We set tolerances for the valley’s seasonal range, not for a coastal benchmark.
Pricing for Gate Installation in San Fernando, CA
Here’s where the cost falls in San Fernando, based on what we actually install:
- Pedestrian gate: $1,400-$2,900
- Single driveway swing gate with new posts: $2,200-$5,800
- Sliding driveway gate with track and pads: $2,800-$7,200
- Automated double security gate with operator and keypad: $7,000-$11,500
- New post footings with concrete pour: $500-$1,400 per post depending on depth and soil
- Operator add-on to an existing gate: $1,100-$2,900 depending on brand and access point
What moves the number: gate width and weight, whether we can reuse the existing posts, soil conditions at the footing, and the operator brand you choose. The price you get is the price on paper before work starts. That’s the whole point. If you want a second opinion on another company’s written estimate, bring it to us and we’ll review it free.
We Also Serve Cities Near San Fernando
Our crews work in San Fernando and the surrounding areas, including Sylmar, Granada Hills, Panorama City, and Sun Valley. If you’re on the edge of city lines and not sure which crew responds, call and ask. A live person answers and will tell you straight.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Fernando
Yes. Absolutely. San Fernando’s sandy alluvial soils have been shifting since before the 1971 Sylmar earthquake, and most original 1950s-1960s posts lean at least a few degrees. If we hang a new gate on a leaning post, it binds or scrapes within months. We level-test every post before quoting, and if it’s out, we remove it and pour a new footing. Call (747) 260-0589 and we’ll check yours before you spend a dollar.
Yes, usually that’s exactly why we install sliding gates in San Fernando. A slide gate runs parallel to the fence line, so it doesn’t need clear swing arc room. The catch is the pad: it has to be level and true, and on older San Fernando pads we check for post-1971 heave first. If the pad is off, we quote resurfacing in the same written price, not as a surprise add-on.
Yes. Under UL 325, any automatic gate operator has to include entrapment protection, which means photo-eyes (the infrared beam that stops the gate if something crosses the path) or contact edge sensors. We install them on every automatic gate we set in San Fernando and photograph their position in the final job record. If an existing gate doesn’t have them, we’ll flag it before we do anything else.
In many cases, yes. The gate panel itself is often still solid; what fails is the hinges, the posts, or the hardware. If the post is sound and the panel’s weight is within the operator’s rated range, we can mount a new operator and bring the gate to automatic. We’ll tell you on the quote if the post needs footing work first. We’d rather do it right once than sell you an operator that fights a leaning post.
Yes, and we do it as a standard part of installation when the existing post is out of plumb or the footing is cracked. In San Fernando, we size post embedment for sandy alluvial fill that moves with seismic activity and wet-season saturation, which means deeper and wider than a coastal footing. New footings typically run $500-$1,400 per post depending on depth and what we hit when we dig.
Contact Vance Gate Repair San Fernando
If you need a gate installed, replaced, or automated on a San Fernando lot, call (747) 260-0589. You’ll get a human on the phone, a free measure, and a written price before any work starts. Adrian Vance built this company on commercial-grade documentation, and that’s what you’ll have in your hand when we’re done: a photo record of the install, a part number list, and the 365-Day Done Right Promise in writing.
Written by Adrian Vance, Owner at Vance Gate Repair San Fernando, serving San Fernando’s gate installation needs since 2014.
Gate Installation in Nearby Areas