Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
AfterFast, Reliable Gate Installation Across North Hollywood
A new driveway gate in North Hollywood typically runs $2,800 to $7,500 installed, with sliding gates on the lower end and custom ornamental swing gates on the higher end. We install on most residential properties within two to three weeks of your written quote, and we pull the LADBS permit before any motor goes in. If you need a gate replaced on a rental property off Lankershim or Victory, call (747) 260-0589 and you’ll get a live person, a written price, and a documented record of every step.
We know North Hollywood’s streets because we work them every week. The apartment complex gates on Cahuenga, the bungalow side yards in the 91601 ZIP, the long ranch driveways south of Burbank Blvd. This matters because a gate spec that works in Studio City doesn’t always survive a North Hollywood summer. We build for the valley heat, the soil movement, and the permit requirements this specific city imposes. More on that below.
Why Vance Gate Repair San Fernando Is North Hollywood’s Preferred Gate Installation Company
North Hollywood homeowners call us for one reason more than any other: we put the price in writing before any work starts, and we leave a photographed record of everything we touched. Clause 1 of our Haven Standard is simple. Have it in writing. No verbal estimate, no handshake, no surprise invoice. The flat price you sign is the price you pay. That habit carried over from Adrian Vance’s commercial access-control work starting in 2014, and it’s now the default on every residential gate we install across North Hollywood.
Our technicians are background-checked and uniformed, and you get their name and photo before they arrive. On a recent gate install near Oxnard St and Lankershim, the homeowner told us she’d had two other companies ghost her after quoting. We showed up, laid out the permit path with LADBS, and sent her photos of the post footings before concrete went in. That’s the job done the way it should be. Every completed installation is covered by our 365-Day Done Right Promise: if it isn’t right, we make it right, no argument, no fee, within one full year.
We answer the phone 24/7. Not a voicemail loop, not a callback queue. A live person at (747) 260-0589, any hour. If a gate fails at 11pm and you can’t get your car out, you don’t want a recorded message.
Our Gate Installation Services in North Hollywood
Every installation starts with a written scope: what we’re building, what we’re trenching, what permit applies, what it costs. Here’s how the most common installs break down in North Hollywood specifically.
Driveway Gate Installation
North Hollywood’s driveway gates fall into two camps: the single-family bungalow with a short drive, and the multi-tenant apartment complex with a long entry lane. The bungalow job is usually a swing gate on posts set in existing concrete. The apartment job is usually a slide gate on track, and those are the ones where we spend real time on the footing. A driveway gate with a basic operator starts around $2,800 here, and climbs with gate weight, track length, and access control.
Pedestrian Gate Installation
Pedestrian gates in North Hollywood are frequently paired with the driveway gate, especially on the 1980s stucco complexes where tenants need a separate walk-through. These are lighter, faster, and cheaper; a standard aluminum pedestrian gate with a mag lock or keypad entry typically runs $1,200 to $2,400. We also handle the intercom tie-in when the walk gate needs to sync with the building’s existing call box.
Sliding Gate Installation
Sliding gates are the workhorse of North Hollywood rental properties, and this is where the valley heat does its worst. Steel track sections expand on 105-degree days and bind the rollers. Post footings crack after decades of thermal cycling. When we install a slide gate here, we pour new footings at depth, use expansion-tolerant track hardware, and spec a motor rated for sustained heat. A new slide gate with track, operator, and safety photocells starts around $3,200 in this market.
Swing Gate Installation
Swing gates on North Hollywood’s older single-family lots often run on posts that were set in the 1960s and are now leaning. A new swing gate isn’t just hinges and a motor; it’s checking the post foundation and often cutting and re-pouring. Custom ornamental iron swing gates, the double gate on a wide driveway, typically run $4,500 to $7,500 installed with automation. The price depends on gate weight, whether you want a matched pedestrian gate, and how much concrete work the posts require.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We install and service Linear, Viking, Ghost Controls, and DoorKing operators, along with five other major automation brands. For North Hollywood’s aging apartment stock, that breadth matters: if a 1990s Linear slide operator finally gives out, we can replace it with a current Linear model and keep the existing keypad and loop detector intelligently wired in, rather than pushing you into a full system rip-out. We keep common Linear and DoorKing boards and safety-edge parts stocked on our trucks so a same-day operator swap on a rental gate is usually doable. Your existing equipment is never an excuse for us to upsell you. We work on what’s already there.
Common Gate Installation Problems We See in North Hollywood Homes
- Shifted hinge posts from cracked footings. Decades of 100-110°F valley heat expands and contracts the concrete around gate posts. We regularly see posts leaning 2 to 4 degrees out of plumb, which binds a slide gate’s rack and pinion or makes a swing gate scrape the driveway. The fix is a new footing, not a new gate; but a cheap bid skips the footing and the problem returns in two summers.
- Original 1980s apartment gate operators at end of life. The Linear, Elite, and DoorKing units installed across North Hollywood’s 2-4 story apartment complexes during the 1980s are now 35 to 40 years old. Capacitors dry out, boards fry, and the whole operator is beyond economical repair. A proper replacement includes a current-model operator, new photocells, and often a permit that was never pulled on the original.
- Gates installed without LAFD Knox-padlock compliance. Any motorized gate that blocks fire department access in the City of Los Angeles needs a Knox padlock or shackle provision. We see ornamental iron gates, beautifully custom and worth real money, that fail inspection because nobody spec’d the fire access. Every new install we do in North Hollywood includes the fire-access hardware, because we already know LADBS will check.
- Operators installed without loop detectors tuned for local traffic. A swing or slide gate operator that doesn’t see a car sitting at the entry will close on it. On North Hollywood’s tighter apartment entry lanes, where cars queue off Lankershim or Burbank Blvd during rush hour, a missing or poorly tuned loop detector is a constant service call. We tune loops to the actual traffic pattern of the property, not a factory default.
Pricing for Gate Installation in North Hollywood, CA
Here’s what we actually quote in this market, in writing, before any work starts.
| Install Type | Typical North Hollywood Range |
|---|---|
| Pedestrian gate (aluminum, no automation) | $1,200 - $2,400 |
| Single swing driveway gate | $2,800 - $4,500 |
| Sliding driveway gate with operator | $3,200 - $5,800 |
| Custom ornamental double swing gate | $4,500 - $7,500 |
| Full security gate with intercom & camera entry | $6,000 - $11,000 |
The two biggest cost drivers in North Hollywood are concrete work and permit status. If we’re cutting and re-pouring post footings, or trenching for power to a gate that never had any, the price reflects that. If a rental property has an existing gate that was installed without a permit, the new installation must satisfy LADBS and LAFD requirements, which we handle as part of the scope. Every quote is free, written, and yours to keep. Our free second opinion applies to any written estimate from another company: bring the paperwork and we’ll review it at no cost.
We Also Serve Cities Near North Hollywood
Our install crews cover the surrounding communities: Studio City, Van Nuys, Sun Valley, and Burbank. If you’re on the edge of North Hollywood or just across the line in one of those nearby cities, the same written-price standard applies. Our full Gate Installation team serves the entire San Fernando Valley with the same 365-Day Done Right Promise on every job.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
Yes. North Hollywood is part of the City of Los Angeles, not an independent city like Burbank, so every new motorized gate installation requires an LADBS permit and must satisfy LAFD emergency-access rules, including Knox-padlock or shackle provisions where the gate blocks fire department ingress. We pull the permit as part of the job. We’ve seen stop-work notices on apartment gates where landlords skipped this step, and the fix is always more expensive than doing it right the first time. Call (747) 260-0589 and we’ll lay out your permit path in writing.
The San Fernando Valley’s inland basin traps heat, and North Hollywood regularly records 100 to 110 degree summer days, which is 15 to 20 degrees hotter than coastal LA neighborhoods. That sustained heat dries out capacitors, cooks control boards, and expands steel track sections until rollers bind. We spec heat-rated components and expansion-tolerant track hardware on every Lankershim corridor install for exactly this reason. If your apartment gate just died in a heat wave, call (747) 260-0589; a live person answers day or night.
Usually a fix, but the fix is in the footing, not the hinge. Decades of valley heat crack the concrete around gate posts, the post leans, and the gate sags. A new gate hung on the same leaning post will sag again. We cut the old footing, set a new post in fresh concrete at proper depth, realign the gate, and photograph the work. Under our Haven Standard, you get that photo record before we leave. If the gate itself is structurally sound, you don’t buy a new one. Call (747) 260-0589 for a written quote.
No, and you shouldn’t try. Safety photocells, the infrared beams that stop the gate if a person or car crosses the path, are a code requirement and the single most important safety device on an automated gate. A gate without working photocells can close on a child or a car. We install UL-listed photocells on every motorized gate, and the cost is a small fraction of the overall job. Skip them and you’ll fail inspection. Get the gate done right with new photo eyes and loop detectors; call (747) 260-0589 and we’ll quote the full system in writing.
North Hollywood’s housing stock is dominated by post-WWII bungalows on tight lots and 2 to 4 story stucco apartment complexes, while Studio City skews toward larger estate lots. That means a North Hollywood bungalow gate is usually a narrower swing gate set close to property lines, with less room for the operator arm to swing, and a neighbor’s wall only a few feet away. The clearance constraints are real, and they change the operator spec. A Studio City estate gate has different clearances and different needs. We run the same Gate Installation in North Hollywood process for both: written price first, documented record after. Call (747) 260-0589 to schedule a free measure.
If you’re replacing a tired old gate or building one from scratch on a North Hollywood property, start with a written quote. We’ll send a technician who will look at your post footings, your power supply, your permit path, and your fire-access requirements, then hand you a flat price in writing, before any work begins. No speculation, no open-ended invoice. Call (747) 260-0589 today and you’ll reach a person, not a recording.
Written by Adrian Vance, Owner at Vance Gate Repair San Fernando, serving North Hollywood since 2014.