Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
AfterFast, Reliable Gate Repair Across Burbank
Gate repair in Burbank typically costs between $185 and $640 for most hinge, post, and realignment work, and most repairs are completed in a single visit. We dispatch technicians to every Burbank neighborhood from the Chandler Bike Path corridor up into the Burbank Hills, and a live person answers at (747) 260-0589 at any hour. That matters when a gate has blown open during a Santa Ana event and your driveway, or your production lot, is suddenly unsecured.
Burbank isn’t one kind of gate market. Within a few blocks of Warner Bros., Disney, and Cartoon Network, we service heavy-duty commercial slide gates on studio lots and high-privacy automated driveway gates on executive residences. That split shapes how we stock parts, schedule crews, and price work across the city. You don’t need a company that’s never set foot in Burbank. You need someone who knows why the swing gate on your 1950s ranch home sags in October and what to do about it.
Our Gate Repair team works everywhere from Magnolia Park to the Verdugo foothills. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve Burbank locally most days. When you call, a real person picks up and asks what the gate is doing – not a recording.
Why Vance Gate Repair San Fernando Is Burbank’s Preferred Gate Repair Company
Adrian Vance founded this company in 2014 after years of commercial access-control work, and that background shows in how we handle Burbank’s mixed market. We document every job. Before we leave, you get a written record of what was found, what was adjusted, and what was installed – the same wiring-diagram habit Adrian carried over from commercial sites. If a future technician ever works on your gate, they won’t have to guess what was done. That alone saves Burbank homeowners from paying twice to rediscover the same problem.
We price in writing before any tool comes off the truck. Clause 1 of our Haven Standard is simple: have it in writing. The flat price is handed to you before work begins, so the invoice at the end never surprises you. We also offer a free second opinion on any written estimate from another company. Bring us the paperwork and we’ll review it at our cost.
Every job, residential or commercial, includes a documented photo record – what we found, what we corrected, what we left behind. Technicians are background-checked, uniformed, and you get their name and photo before arrival. And under our 365-Day Done Right Promise, if the repair isn’t right, we make it right within one full year with no fee and no argument.
Our Gate Repair Services in Burbank
Hinge & Post Repair
This is the most common call we run in Burbank’s flatland neighborhoods. Much of the housing stock east of Victory Blvd was built in the 1940s through 1960s, and a lot of those original ornamental wrought-iron swing gates still hang on period hardware – hinges, pintles, and drop-rod latches that are now 60 to 80 years old. The fatigue is real, and we see it daily. A hinge post that has been carrying a steel gate for seven decades does not fail slowly. It cracks, or the gate sags visibly, or both.
We repair or replace hinges and pintles without condemning the gate. Original wrought iron is almost always worth keeping. We weld where the metal is sound, replace the hardware that’s done, and set the post so the gate swings true again.
Gate Realignment
Burbank’s summer heat is punishing. The city sits deep in the San Fernando Valley and routinely records some of the highest temperatures in LA County. That thermal expansion-contraction cycle warps wooden gate frames and stresses weld joints on metal gates. Add the Santa Ana winds that funnel through the Verdugo Mountains corridor, and a gate that was square in June is dragging on its latch by late September.
Realignment isn’t cosmetic. A misaligned gate stresses its operator motor, wears its hinges unevenly, and usually fails to close securely. That’s why we treat it as a repair, not a tune-up.
Electric Gate Repair
Automatic operators on Burbank properties get hit hardest right after wind events. The photo-eye – the infrared beam that stops the gate if something crosses its path – gets knocked out of alignment and the operator won’t close, or won’t open, or chatters and trips repeatedly. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. One company for whatever motor is already on the property.
Electric gate repair includes limit-switch calibration, photo-eye alignment, keypad and intercom wiring, and entrapment protection checks. A misadjusted limit switch can quietly overtravel the gate and destroy the drive components. We set it and photograph the new position so there’s a record.
Automatic Gate Repair
If your gate is motorized and it isn’t moving correctly, it’s usually one of three things: the operator, the gate’s physical alignment, or the safety loop. In Burbank Hills, where many longer driveways have retrofit operators mounted on older masonry pilasters, the pilaster itself is often the hidden problem. Those pilasters were never engineered for motorized loads, and we see brick face shells cracking and anchor bolts pulling loose.
We don’t just bolt parts to a failing structure. We assess the post, the arm bracket, the operator mounting, and the travel path – then tell you what’s actually causing the problem and what it costs to fix it right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Burbank
We repair all nine major gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – because Burbank properties have whatever operator was installed when the gate went in, not whatever a sales rep prefers to sell. On a recent job east of Victory Blvd, we realigned a LiftMaster operator on a sagging single-post swing gate after we poured a new hinge post footing. The keypad entry and safety photocell both worked clean afterward, no false obstruction trips. If your gate has a Ghost Controls, DoorKing, or Mighty Mule operator, we carry common parts for those brands and can usually complete the repair in one visit.
Common Gate Repair Problems We See in Burbank Homes
- Undersized 1950s hinge post footings. The original concrete footings on flatland ranch homes are often too small for today’s heavier steel gates. Santa Ana winds blow through and crack or heave the footing, leaving a single-post swing gate hanging at an angle. We pour new footings with proper depth and support the gate through the cure.
- Fatigued period hardware. Sixty to eighty years of use on original wrought-iron hinges, pintles, and drop-rod latches leaves gates sagging even before any wind event. We replace the hardware and repair the iron, keeping the gate’s original look.
- Retrofit operators overloading masonry pilasters. Burbank Hills properties often have automated operators that were added to older brick or block pilasters never designed for that load. Anchor bolts pull loose and face shells crack. We repair the mounting correctly, not just tighten bolts that will fail again.
- Thermal warping and weld fractures. Burbank’s extreme summer heat cycles warp wooden gates and crack welds on metal ones. By late summer and early fall, gates that never gave trouble are dragging and binding. We diagnose the actual cause and correct it rather than forcing the gate shut.
Pricing for Gate Repair in Burbank, CA
Here are honest Burbank market ranges. Hinge and post repair on a single-swing gate on a flatland ranch home typically runs $185 to $420, depending on whether we’re rebuilding the post footing with new concrete or changing hardware only. Gate realignment, including operator recalibration after the gate is physically corrected, runs $150 to $300. Electric gate repair – photo-eye alignment, limit-switch adjustment, keypad wiring – runs $140 to $290. A full automatic gate operator replacement on a Burbank Hills driveway runs $850 to $2,200, depending on brand, gate weight, and whether the arm bracket and post mounting are intact.
Every price is written down and handed to you before work begins. No exceptions, ever. The estimate is free. Call (747) 260-0589 for an exact quote on your gate.
We Also Serve Cities Near Burbank
Our crews cover the surrounding San Fernando Valley too – North Hollywood, Sun Valley, Studio City, and Van Nuys. If you’re in one of those areas and need a gate specialist who works the same way across the valley, visit our Burbank page to learn more about our local coverage.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burbank
The short answer is the original footings. Most of those post-WWII ranch homes were built between the 1940s and 1960s, with ornamental swing gates set on concrete hinge post footings that were sized for lighter steel and milder weather. When Santa Ana winds funnel through the Verdugo Mountains corridor, those undersized footings crack or heave under the wind load. The gate sags, drags, or blows off its hinges entirely. The repair that holds is a new footing at proper depth, not a bolt-tightening job. If your gate moved during the last wind event, call (747) 260-0589 – we’ll tell you over the phone whether the post is a concern based on what you’re seeing.
Yes. Most of the time, the iron itself is still sound. We replace hinges, pintles, drop-rod latches, and realign the gate, then repair or replace the hinge post as needed. The original gate stays. We only recommend replacement when the steel is so fatigued or corroded that welding new sections would cost more than a new gate. And in that case, you get a written price for either option before you decide.
Yes. Adrian came out of commercial access-control work, and we’ve repaired heavy-duty slide gates on production facilities near Warner Bros., Disney, and Cartoon Network. Slide gates on studio lots carry daily cycle counts far beyond a residential gate, so the motors, chains, rollers, and safety loops all need commercial-grade diagnosis. We document the limit-switch readings and photo-eye alignment on every commercial job so the next service visit doesn’t start from zero.
Automatic gates in California must meet ASTM F2200 and UL 325 entrapment protection standards, which require at least two independent means of entrapment protection – typically photocells (photo-eyes) and a reversing edge or inherent motor reversing. For a residential driveway gate, the photo-eye is non-negotiable. If your gate won’t close or beeps and reverses for no visible reason, the photo-eye is usually the first thing we check. We verify and photograph the alignment on every visit under Haven Standard Clause 4. Gates that don’t meet current standards present a real safety risk to kids, pets, and anyone walking near the gate, so we flag what’s needed in writing and leave the documented record with you.
Watch the pilasters themselves. On many of those older hillside properties, the masonry piers were built decades before anyone planned to automate the gate. The added load of a motor, a steel gate, and daily opening cycles stresses the structure. You’ll see cracking face shells, loose anchor bolts, and sometimes a slight lean. That’s a structural issue, not an operator issue. We repair the mounting and reinforce the pier when needed, and we photograph what we find so you’re not guessing. Estimates are free, and the written price goes in your hand before any work starts. Call (747) 260-0589.
Key Takeaways
- Most gate repairs in Burbank cost between $185 and $640, with faster single-visit service for hinge, post, and realignment work.
- Santa Ana wind failures are most common east of Victory Blvd, where original 1950s hinge post footings crack under wind load.
- We repair all nine major automation brands, so we work on whatever operator is already on your property.
- Every job gets a written price before work starts and a documented photo record when the technician leaves.
- You get a real person on the phone at (747) 260-0589 – 24 hours a day, seven days a week.
Call Vance Gate Repair San Fernando for Gate Repair in Burbank
We make it simple. You call (747) 260-0589, a real person answers, and we schedule a visit to your Burbank property. The technician arrives with a name, a photo, and a van stocked for swing, slide, and automatic gate work. You get a written price based on what we find – not a verbal guess – and you approve it before any tool comes out. The repair is done, photographed, and documented, and your 365-Day Done Right Promise starts the day the work is complete. Free estimates, written pricing, and no phone tree. Call now.
Written by Adrian Vance, Owner at Vance Gate Repair San Fernando, serving Burbank since 2014.